1 / 11
Raspberry Pi Touch Display 2 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case Raspberry Pi Touch Display 2 for Raspberry Pi 3 (B/B+) / 4 / 5, mounting brackets for plate and V-Slot profile 2020
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 777
- Makes
- 3
- Views
- 4,017
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Case for Raspberry Pi Touch Display 2 with housings for the Raspberry Pi 3 (B/B+), 4 and 5.
Updates
- 2025-08-11: Various models revised, the thread for the screw connection between the display case and the stands is M2.5 and not M3.
Features
- Internal fan mount (40mm x 40mm x10) - optional
- Thread inserts
- Raspberry Pi 5, access hole to on/off button
- Raspberry Pi 4 / 5, additional slot for camera ribbon cable (located over the ethernet port)
- Stands and brackets can be rotated 180° to adjust the position of the USB ports (left or right)
- Alternative mounting bracket for V-Slot profile 2020
- Alternative mounting bracket for plate (wall), with additional long version and M1:1 drilling pattern as pdf
Required parts
- Raspberry Pi Touch Display 2
- Raspberry Pi 3 (B/B+) / 4 / 5
- 4x M3 thread inserts → Ruthex RX-M3x5.7
- 4x M2.5x6+6 Male-Female PCB standoff → Spacer set
- 4x Cylindrical head screw M2.5 x 16mm (for version with optional fan)
- 4x Cylindrical head screw M2.5 x 5mm (for version without optional fan)
- 4x Cylindrical head screw M2,5 x 12mm (for connection stands or brackets)
- 4x Cylindrical head screw M3 x 16mm (for connection Raspberry Pi housing)
Optional
Fan
- Fan 40x40x10, 5V → Noctua NF-A4x10 5V incl. anti-vibration mounts
- 4x Anti-vibration mounts (see fan)
- 2x 1P Single Dupont connectors (for fan)
Mounting brackets
- 2x M3 thread inserts
- 2x Cylindrical head screw M3 x 10mm
Assembly
Assembly brackets
| rpi-bracket-plate / rpi-bracket-plate-long | rpi-bracket-vslot |
 |  |
Raspberry Pi 5, Break out cover slot for camera ribbon cable
Mounting bracket for plate
For fastening use 4x 4,5 Countersunk screws or 4x M3 screws.
Print instructions
Supports: No
Tags
casemountingplatefanraspberryraspberrypiraspberrypicaseraspberrypi4touchscreen2020vslotextrusionraspberrypi3mountingbracketcoolingfanraspberrypi3casevslotraspberrypi4case40mmfanthreadedinsertraspberrypitouchscreen7touchscreenpitouchscreenraspberrytouchscreentouchscreencasevslotmountraspberrypi5caseraspberrypi5touchdisplay2