1 / 2
Raspberry Pi Cam V2.1 mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi Cam V2.1 mount for RatRig V-Core 3
- Rating
- 4 / 5
- Likes
- 17
- Downloads
- 103
- Makes
- 1
- Views
- 1,088
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Mount for Raspberry Pi Camer V2.1 for the front left corner on a RatRig V-Core 3.
Place the camera module into Pi_Cam_Back and push Pi_Cam_Front into place. I didn't need to use glue.
Insert he clips for the camera cable into the 3030 extrusion and turn 90 degree. They have a very tight fit!
Prints without supports.
Printed in PETG at layer height 0.2mm.
Hardware needed:
- M3 bolts for the camera mount, 2x M3x6 mm
- M3 heat inserts for Pi_Cam_Back, 2x
- M4 bolt, washer and locking nut for mounting the camera to the corner bracket, 1x M4x8 mm
- M6 bolts and nuts for the 3030 extrusion for mounting the corner bracket, 2x M6x12 mm