1 / 6
Multi-Compartment Trays 3.0 Stackable with 6x2mm Magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
README
Print Instructions
- Space the both parts far enough away if printed together to make sure the magnets don't accidentally jump out of the holes. (Shouldn't be the case if you have a magnetic build plate)
- Absolutely make sure to stop the Print at 1mm height (right before the magnet holes would be closed.
- In Bambu Studio right klick the layer preview bar on the right and add the pause there)
- Insert the magnets the right way up so the box can stack.
- The magnets should be facing eachother so they're attracted when you put a base and a lid next to eachother
- All lids should have the same magnetism direction
- All bases should have the same direction of magnet
When Stacked:
| Base of the third Container | North South |
| Lid of the second Container | South North |
| Base of the second Container | North South |
| Lid of the first container | South North |
| Base of the first container | North South |