1 / 6
Mini nas with Odroid HC4 + 2 SSD 1 To SATA
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I bought the Odroid HC4 to use as mini nas for pictures back-up and I put it in a closed box 120x130x140 with new vent.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I uploaded 2 versions: old (with foot) and new version. The old version needed 4 feets because the Odroid card was too low. Please use the new version that correct this issue.
Here below the BOM that I used to make it. You'll need:
- Odroid HC4
- Noctua nf-a8-pwm 5V fan 80x80x25 vent
- 2 SSD 1To with SATA interfaces
- 6x M3 and 6x M4 insert threads
- 6x M4 conic screws
- 6x CHC M3x10 screws
The silent bloc supplied by the vent can be integrated on the grid for the tightening of the vent.
You will need to assemble the front cover with the base before insert the grid/vent/vent ring.
I used Polymaker Wood PLA.
Enjoy!
