122 models
This case is a remix of the ODROID N2 case sold by AmeriDroid . This version makes it easy to print without supports and requires no hardware to use with the N2/N2+. The case protects the components from damage and dust. Special thanks to…
Das Modell wurde von mir erstellt, um mein eigenes NAS zu konstruieren. Es ist nicht zu 100% identisch mit dem Original aber die Außenmaße passen soweit.
This is a simple and compact case for the Odroid H2 and hopefully updated to be compatible with the H3 (untested since I don't have one). The case is in two parts and there are two variants of each half. The bottom can support two 2.5"…
To assemble this case, you need several additional parts. Parts list: 1 X 92mm x 92mm x 14mm fan (Noctua NF-A9x14) 1 X 40mm x 40mm x 10mm or 20mm fan (Noctua NF-A4x10 or Noctua NF-A4x20) 1 X LOP-200-18 or EPP-120S-15 PSU Up to 4 X SATA…
This is my model based on the astrodroid r2d2. The model is quite unstablr when standing. It requires a specific setup of the supports. The supports must not reach the inner parts of the hinge such as the legs and the head. I recommend…
This case is for Odroid-H4 series. For the better cooling, I added a 40 mm fan on the side of case. Also, to make the assembly easy, I used some threaded heat inserts. You should not need any supports to print these parts. *Currently, I'm…
Simple case for Odroid N2, N2+ and M1 (their connector layout and the heatsink profile are very similar). The M1 version is tall enough to allow an SATA SSD to be mounted (although I didn't use the original mounting kit). The case keeps…
This is a remix of https://www.thingiverse.com/thing:3735600 to adapt the case to work for an Odroid C4. You will need: 4 - M2.5 x 20mm cap head screws 4 - M2.5 nuts 6 - 8mm rubber feet (optional) Print Settings Printer Brand: Creality…
Deutsch unten. The Echos are good devices, but also a little plain. Therefore, thanks to a 3D printer, I converted my Echo into an Omnidroid, or rather Echodroid. The Echo Dot 4 is simply placed in the bracket and sounds even a little bit…
This is remix of a Case for a NAS Build with the Odroid H2/2+/3/3+ Boards I added new HDD rails with vibration dampening. The rails consist of two parts the rail shell is of PLA/PETG the rail inserts are TPU There are two different rails…
I really like Chris' Odroid case, but the H3+ runs better with a fan, so I remixed his version. My version is taller to accomodate a Noctua NF-A9 PWM fan. There is still a bit headroom, so even thicker fans should fit. I also replaced all…
This bracket for the ODROID N2/N2+ makes it super easy to mount on a wall. This version improves on the original design by introducing a sacrificial layer for the mounting holes which eliminates the need for supports when printing. This…
A simple adapter to install 120mm fans on Odroid H4 SBCs. I printed with one of the cheapest PETG plastic options. My print settings: 0.25mm layer height. 3 perimiters. 0 top and 0 bottom walls. 15% infill. Rectilinear pattern.
Due to the successful use of this component, I have now completely reprogrammed it in OpenSCAD. I was able to incorporate all the points that I had missed in the past. One of the biggest features is that the component can be printed…
This is based on CBiker's great design. I love the simplicity and especially the screw-free cover locking mechanism. The two main issues I had were 1. I don't need the expanded base and prefer a cleaner look; and 2. my XU4 is easily…
Deutsch unten. The Echos are good devices, but also a little plain. Therefore, thanks to a 3D printer, I converted my Echo into an Omnidroid, or rather Echodroid. The Echo Dot 5 is simply placed in the bracket and sounds even a little bit…
I really like Chris's design for the Odroid H2 case, but the H3 has a set of IO pins that get in the way of the original design. I modified their design to allow these IO pins to fit with the case top. I also added a different grill on…
Looking to turn your Odroid H4 Plus into a slick little NAS box? Look no further! This 3D-printed case snugly houses the board, provides decent airflow, and has built-in spots for drives—all while keeping everything nice and tidy.…
Odroid c1+/c2 case. Now uses m2 screws and has optional 40mm fan mount. There are 2 different bottoms, the thicker one is increased to 2mm (original is 1.5mm). There are 6 top variants, fan/no fan and original, small, and no GPIO cut out.…
Summary I bought the Odroid HC4 to use as an offsite backup target for my server. I couldn't really trust the toaster-like case, however, so I decided to model a new case for it. Hardware and assembly You'll need: the original screws. 1…
I created a sleek housing for my Odroid N2+ NAS. It was printed with white PETG to give it a modern look and make it more temperature resistant, but I could imagine that with the current cooling (80mm FAN) PLA could be used as well. It…
Time Capsule alike sized case for harkenel's odroid-hc4 board and two 2,5'' ssd/hdd disks supports only 2,5'' Disks (up to 20+/-5 mm height - like 4 or 5 TB models) everything, except hdd_holders, can be printed without supports Update…
ODROID HC4 NAS CASE Updates: Added 2.5" HDD support. Added 120mm fan version. About This Design If you're looking for an alternative case for your Odroid HC4 that fits 3.5" HDDs and 2.5" HDDs , you've come to the right place. Many of the…
great tiny nas for odroid h4 plus Version 1.4 Improvements: Removed Fourth Standoff : The fourth standoff has been removed to eliminate interference with the RAM on the motherboard, allowing for a proper and secure fit. Power Button Hole…
3D model of ODROID H3+ & LAN v2 for 3D design. Designed mostly by hand measurements. Sizes should be good. But untested, because my box design not yet finished.
I also removed text at the bottom of the case for better printing. Remixed from: https://www.thingiverse.com/thing:1398553
A modern enclosure for this fantastic Hardkernel device with the following features: Very tight geometry. Plastic extensions for Power and Reset switches. NUC compatible (85mm M3) mounting holes (inserts only) for Vesa Mounting Plate. Air…
You will need: (13) M2.5x10 self tapping screws to assemble the case (4) M3x6-8 self tapping screws to mount the C4 (4) M3x10 BHCS and (4) M3 Heatset inserts to mount the 3007 5v fan to the case Optional: (4) M5 BHCS or SHCS to mount the…
This is a compact network attached storage (NAS) case for the Odroid H4+ (ultra) which uses an Intel N97 (faster variant of n100). Onshape: H4 NAS | NAS This case is designed to house four 2.5" drives (SSD/HDD), Odroid H4+(ultra), and…
I wasn't happy with the available printable cases for the XU4 - so I designed this. I used four M3x25mm cap head hex screws to assemble the case. Update: Download HDMI version if you want access to the HDMI port. Note 1: This is only…
This is my design of a blade rack for Odroid h2 https://www.hardkernel.com/shop/odroid-h2/ . It is 4U high including about 1cm above and below for airflow, each bay has a 40mm fan, I used (…
Description This is a very slim case for Odroid C2 SBC. All ports are accessible. Additionaly you need 4x M3 6-10mm counter sunc screws. no special print Instructions. Do as it work best for your printer/material. If you print with…
Disclaimer: I haven't built the model yet, so I haven't tested it, but I will probably build a variant for the Rock5B or Nvidia Jetson Nano I had originally planned to use a BeQuiet Dark Rock 3 as a cooler (I still had it lying around) If…
T3-M4 Astrodroid from Star Wars The Old Republic game, 3D printible, Star Wars Miniatures (wizards of the coast) scale.
This is a remix of @proxel Odroid H3 / H3+ Fan Case with rounded hex net and other minor improvements.
Hardkernel's Odroid HC4 is a great SBC for a home NAS, but the toaster case didn't fit my needs as I don't intend in using 3.5" drives. So I designed a minimal case that allows for two hot-swap 2.5" up-to-15mm height HDDs. Parts needed 2…
This is a holder exclusively for the odroid N2! It has a self-locking so that the Odoird does not fall out. The 4 mounting holes have a hole spacing of 60x120mm. To open, press the housing slightly apart and pull out the odroid!
Simple sled for Odroid H2. [ https://www.hardkernel.com/shop/odroid-h2/ ] This design mounts 2 x 2.5 drives below mainboard keeping clearance for ram and nvme drive. The design allows for simple protection on my (typically crowded)…
Just print the brackets in your preferred orientation and use the spacers to mount the brackets. You can modify the height of the spacers to accommodate the m3 bolts you have.
Discover an upgraded ODROID-N2/N2+ case, inspired by swwatson's original design . I've enhanced it by updating the Home Assistant logo and introducing modularity. Now, print a blank insert and choose between the classic or new Home…
This is a remix of this by skroob (original license attached): https://www.youmagine.com/designs/odroid-c4-case Using Tinkercad: https://www.tinkercad.com/things/9akxlo0ZdoA-odroid-c4-case-remix Original model at thangs.com:…
Remixed sled for Odroid H2/H3/H3+ Aim was to create sled that would fit Odroid mounted with fan in no more than 2U. So the base is extruded to allow airflow and lower mounting. 2 SSDs are mounted in the back. INCLUDED : Mount for external…
Wall mounts for Home Assistant Blue (Odroid N2). Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0.12 - 0.2 Infill: 20% Filament: Hatchbox PLA Black Notes: Print at whatever resolution you want. The supports are not…
You can use these "feet" to mount the Odroid-HC2 onto a wall, a DIN rail clip or anything else. My primary concern while designing this was to allow the Odroid-HC2 operate in an upright position thus enabling the best all around air flow…
Simple sturdy case for the ODROID-GO Advance
Give your Odroid H3 a professional look and reliable protection with this custom-designed case. The enclosure is tailored for a perfect fit and offers support for M.2 expansion boards, making it ideal for advanced setups and upgrades. The…
This project requires: Odroid M1 with 12V power supply 3.5" HDD, angled SATA cable, custom power cable 80mm fan with USB connector 14 threaded inserts (M3, 5mm diameter, 4-8mm long) 10x M3 x 10mm screw 4x M3 x 16mm screw 4x Mx30mm screw…
I remixed Icefox's excellent XU4 case by adding a slightly more elegant reset button. As opposed to having to break it off of the model, this one has a hole and separate button. When I was building my recalbox I needed to reset my XU4… a…
These are edited files to house an ODROID N2+ in the same bladechassis as the H2/H3 by Magnus. Use all the files of the original post and replace the Base, Back and Front files by the ones from this remix. Also added the Rack-Ear.stl, as…
Have not yet verified that it actually works, but all the screw holes line up in CAD.
Odroid C2 Hifi Shield Case Note: If you like my design feel free to leave a tip. It will help me fund the filament used to iterate on my designs. Description This is a case I designed to house the Odroid C2 from hardkernel as well as the…
This a customized version of The Ultimate box maker by Heartman. Customize has been done for odroid M1. On the bottom you have to drill some holes manually for screw to fix the PC to bottom part. I would also recommend to make some hole…
A modified cover for the Odroid XU4Q (fanless) that fits the " Odroid XU4 Gehaeuse / Case " by CBiker Print instructions Resolution: 0.2mm Infill: 20% Notes: Materials: Red: Atomic Filament Dark Cherry Red PLA 1.75mm Gray: Atomic Filament…
A snap fit Odroid n2+ case I made for my 6 inch server rack. I printed it in pla, but should also work in other filament
Remixed the Hardkernel ODROID-XU4Q passively cooled case with 4 screws in the top and bottom as per a request on Reddit. Category: Electronics
Clips to mound an Odroid N2+ (or Home Assistant Blue) single board computer via heatsink fan screws to an IKEA Skadis pegboard Notes: Hooks & nubs are 5mm diameter. May be brittle. Print with no infill Requires 4 M3 screws with 6mm shaft…
This is a remix of the Odroid HC2 fan shroud. I have printed this and it is working. it fits more tightly around the drives and the sides of the enclosure forcing more air across the drives. It is designed to mount a 120mm fan to a stack…
I could not find a suitable mini rack mount for my odroid h4 nas. So i remixed this Rackmount NAS for ODroid H4 by Matt C Now it fits in a 10 inch minirack.
This is a case for Hardkernel/Odroid USB3.0 to SATA Bridge Board Plus. You can find the board here: https://www.hardkernel.com/shop/usb3-0-to-sata-bridge-board-plus/ The stencil font used is " Post no bills Colombo " from FontSquirrel. I…
This is a holder for Odroid 2N with a large heatsink that can be mounted on the bottom of the top of the case (or on the wall). It consists of two rails and one base. A hole on the side allows you to secure both parts against spontaneous…
Simple stand holding Odroid H3 in vertical orientation for best passive cooling. Needs four M3x6 screws.
0,2mm and no supports if printed face down. Original STEP files: https://dn.odroid.com/S922X/ODROID-N2/drawings/
Simple open frame NAS using odroid H2 and two 3.5 inch drives The design allows for mounting two drives and a 120mm fan in a compact, simple to print form factor. A 15v to 12v buck converter powers the fan. The design ended up going this…
This is a box for an ODROID C2 case. It is designed for an 80mm fan. For the HDMI port, there is no hole in the case, ODROID is used as a server.
Found a case for the ODROID XU4, but the ODROID XU4 I had used a tall passive heatsink vs the low-profile one with fan. Adding a 7 or 10mm fan to the lid, needed about 15mm more height. Lid also did not have holes to mount fan to lid, so…
Needed a rack for multiple legacy ODROID C2 computers being used in a cluster. Remixed a very good Raspberry Pi rack to account for slight dimensional differences and port locations.
simple rack mount for odroid n2+
While the stock ODROID-H5 Case Type1 worked fine and kept temperatures under control, I wanted more airflow for the SSDs and use a larger fan that is large enough to stay quiet even under load. DISCLAIMER : Photos show v1 with manually…
Here is my Odroid Go stand, simple and neat. I needed a nice stand for display and storage of such a cool piece of hardware. Prints without supports or rafts. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No…
I uploaded 2 versions: old (with foot) and new version. The old version needed 4 feets because the Odroid card was too low. Please use the new version that correct this issue. Here below the BOM that I used to make it. You'll need: Odroid…
I needed to mount the HC1 on the wall so I made this. Print two, one for the top and one for the bottom, and slide them on.
Materials and methods Print list: n2-top-wallmount Part list: Odroid N2+ or N2 Odroid N2+ case Part links: https://www.odroid.nl/index.php?route=product/product&path=246_239&product_id=868…
Simple stand for Odroid-Go Advance V2. Not the most beautiful thing design-wise, but it gets the job done :)
TPU feet designed to fit into the printed feets of the original case
Disclaimer This files are for mounting Odroid M1 on DIN rail in purpose of Voron 2.4 R2. But I haven't tested and fixed modelings yet. I'm gonna print, test, and take photos of them as soon as possible. During that time, you can feel free…
I broke a screw in an m.2 standoff on my odroid H3+. I never bothered to send the board around the world for repair, and locked an SSD with a piece of electric tape or some other means. However now with a 3D printer I designed a push-in…
Intended for import as a fairly accurate dimensional reference. https://wiki.odroid.com/accessory/display/3.5inch_tft_touchscreen_shield/start
Bottom case holes sized for 5mm.od x 6mm brass M3 inserts (8x) Top case screen mounts sized for 5mm.od x 4mm brass M3 inserts (2x) Print buttons with an adequate skirt https://wiki.odroid.com/odroid-c1/odroid-c1…
Printer: Ender 3 v2 Direct Drive Filament: Overture PLA+ White Settings: SuperSlicer 0.2 Stock, 30% Infill Apply supports. The workpiece may undergo filing, I noticed that the components in the Odroid are not always accurate. I tested and…
https://apolloautomation.com/products/apollo-odroid-m1s
Une version est marqué “ODROID H4 ULTRA” et une version sans marquage + le fichier Fusion 360
I design this to avoid clutter on my desk so the Odroid M1 could be mounted on the wall. You should use supports only qhere the connectors are located, everything elese should print just fine. I recomend using PETG or ASA or other…
A case that can mount to other thinngs Category: Models
simple vesa mount for the odroid u3 fits 75mm & 100mm hole spacing Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: No Resolution: 0.26 Infill: 30% Category: Computer
I like the ODROID-N2+ but exposed fan blades and brass standoffs are too spartan for my taste. So, I made this cover. It press fits over onto the fan or you can use 4 M3x8 conic screws to attach it. Finish with stick-on rubber feet. Fits…
The model can be printed laying flat on the front surface. I've printed it in PLA as well as PETG, with 0.2mm layer height and 4 walls
I wanted the fan (NF-A9x14 PWM) to be placed within the box instead of outside. There's unfortunately not enough space between the heatsink and the top panel and the connectors get in the way too. So the fan hole had to be moved and extra…
Simple frame for Pi or Odroid c4 with fan mount for classic Pi 5V fan, for more info about mounting lookup the source i based this on. I edited the base so i have base for top and bottom vertical mount, aka gluing some clips so i can put…
This is a mini rack to contain an odroid and an SSD disk. PETG is recommended Note that this is designed with the the following case in mind: https://www.amazon.com/gp/product/B07L839LWN (3.7 x 2.83 x 1.22 inches) This should be…
I printed it out of PCTG and used M3x5 screws. Fixed clip part up, flexible part down - the fixed part should carry the load. First clip the flexible part onto the rail, then push the top part in.
A minimalistic case for Odroid H3 optimized for passive cooling in vertical orientation. It fits a 120mm fan for more demanding workloads. M3 screws hold together the frame and case. An optional DIN rail clip is included. The case model…
Cover to protect the device
This is an add-on for the Odroid H2 Rackmount / Blade Center . I use Odroid Rackmount upright and in the 2nd evolution step as baseplate to connect 60mm Noctua fans on each Odroid H2 / H3. (1st evolution step is viewable in the background…
Remix of the stopper for the Manual reel for sewing tape made by @Mocodroid (https://www.printables.com/model/51369-sewing-tape-reel) The current stopper would not fit the two tapes that my wife has. I remixed the stopper and adjusted the…
This is a Odroid H3 Case, printed in 2 parts. No supports required for any of the parts (At least not required on Prusa CORE ONE). The main design feature of this case is the airflow provided to NVMe, RAM modules and 2x SSDs while also…
The housing consists of two parts and is connected to each other with four M3x12 screws and nuts. An 80mm fan is placed on top, which is attached to the upper housing with four M3x35 (or longer) screws with nuts. The fan grill has a font…
I made a remix of the blank backplate for use with a Hard Kernel Odroid C4 board.
Print in PETG or better to resist heat. Stronger model allows fixing with cable tie as well.
