Odroid H3+ standoff screw replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A push-in replacement for a m.2 SSD screw for a standoff with a screw end broken inside
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
I broke a screw in an m.2 standoff on my odroid H3+. I never bothered to send the board around the world for repair, and locked an SSD with a piece of electric tape or some other means. However now with a 3D printer I designed a push-in cover for the standoff that locks the drive in place. I printed it on a standard Bambu P1S settings with supports. The hole that goes over the standoff should be printed upright. My Lexar NM620 is a little bit loose, but I decided not to make adjustments as SSD drives may vary in sizes.
Internal diameter is 5,1 mm, internal hight is 4 mm.