1 / 4
Fanttik V8 slim SKADIS holder V3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimization of the bracket for my workshop situation
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Required for installation:
2x M5x25 threaded screws
M5 threaded drill bit (variant 1)
5 mm drill bit (variant 2)
Installation is easy.
Option 1:
Use the M5 thread cutter to cut the 4 mm holes accordingly. Screw the M5 thread onto the Skadis plate from the 5 mm hole side.
Variant 2:
If no M5 thread cutter is available, simply enlarge the 4 mm holes with a 5 mm drill bit and install a continuous M5 threaded screw with threaded nuts.