1 / 4
Fanttik V8 slim SKADIS holder V3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Optimization of the bracket for my workshop situation
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Required for installation:
2x M5x25 threaded screws
M5 threaded drill bit (variant 1)
5 mm drill bit (variant 2)
Installation is easy.
Option 1:
Use the M5 thread cutter to cut the 4 mm holes accordingly. Screw the M5 thread onto the Skadis plate from the 5 mm hole side.
Variant 2:
If no M5 thread cutter is available, simply enlarge the 4 mm holes with a 5 mm drill bit and install a continuous M5 threaded screw with threaded nuts.