ESRack - Module - 3U NUC Cluster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4 NUC cluster mount for ESRack environment
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with the same recommendations as ESRack
The model is split into to, a bottom 2U unit and a top 1U unit, the 2 halves can be screwed together with M10x14mm nuts and bolts. the bottom half can be printed on a bed surface area of 256x256mm, but if you have a larger print bed, feel free to combine the 2 parts.
Also added 1 keystone jack for each NUC fitted to allow front RJ45 connection.
Given the density of parts, the mounting hole access is a little tight, recommend to use a 90 degree Allen key to get to tight spots.
I fit 2 12th gen NUCs and 2 11th gen NUCs, the 12th gen are a snug fit while the 11th gen are a little lose by a mm or two