LGB track pieces
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Track pieces for Lehmann Gartenbahn and similar Gauge 1 railways.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
This is a set of track pieces for Lehman Gartenbahn (and maybe similar Gauge 1 tracks).
Currently only contains short straight track pieces for countering switches, but more can be created using a CAD program by extruding the cross-section. Sleepers and connectors can be bought from LGB and are not needed for shorter pieces, or 3D printed using for example a model from ScubaSteve (connectors).
Even more lengths will be added later, or can be created by extruding the provided drawing.
For a full rail, you need to print two same-length pieces, and provide sleepers and spring connectors.
In prototyping, I printed from PLA, but these pieces should not be left outside for long.
The pieces will of course be non-conductive if printed with normal filament, but PETG Magnetite might allow enough current (please post a Make if you test this).