LGB track pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Track pieces for Lehmann Gartenbahn and similar Gauge 1 railways.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a set of track pieces for Lehman Gartenbahn (and maybe similar Gauge 1 tracks).
Currently only contains short straight track pieces for countering switches, but more can be created using a CAD program by extruding the cross-section. Sleepers and connectors can be bought from LGB and are not needed for shorter pieces, or 3D printed using for example a model from ScubaSteve (connectors).
Even more lengths will be added later, or can be created by extruding the provided drawing.
For a full rail, you need to print two same-length pieces, and provide sleepers and spring connectors.
In prototyping, I printed from PLA, but these pieces should not be left outside for long.
The pieces will of course be non-conductive if printed with normal filament, but PETG Magnetite might allow enough current (please post a Make if you test this).