Upgrade - držák lahve a věšáku a ramínka \ bottle, umbrela and hanger holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Další 2 desky -držák ramínka nebo deštníku, druhá je pro lahev Next 2 pletes -hanger or umbrell holder and bottle holder
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Další 2 desky, které lze použít s původním držákem. Nyní se jedná o držák dětské lahve. Děti používají “zdravou lahev”, která je širší a do standardních držáků v autě se nevejdou, proto jsem využil držáku na opěrkách a udělal držák lahve. Průměr lahve je 75 mm.
Druhá deska je držák na deštník, nebo ramínko dle potřeby - pochopitelně za předpokladu, že tam nesedí dítě.
Plate6_bottle_holder - vyměnitelný držák lahve. Tisk PLA, pro jistotu včetně podpěr, 0,2 mm quality, 3 perimetry, výplň 15%
Plate7_umbrella_hanger_holder - držák ramínka na šaty nebo deštníku. Tisk PLA, bez podpěr, 0,2 mm quality, 3 perimetry, výplň 15%
Another 2 plates that can be used with the original holder. Now it is a baby bottle holder. The children use a "healthy bottle", which is wider and does not fit in the standard holders in the car, so I used the holder on the armrests and made the bottle holder. The second board is an umbrella holder or a hanger as needed - provided, of course, that there is no child sitting there. The diameter of the bottle is 75 mm.
Plate6_bottle_holder - replaceable bottle holder. PLA printing, for safety, including supports, 0.2 mm quality, 3 perimeters, 15% filling
Plate7_umbrella_hanger_holder - clothes hanger or umbrella holder. PLA printing, without supports, 0.2 mm quality, 3 perimeters, 15% filling