Rummikub Tile stand & Tile storage container - Original Travel edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These models improve the experience with the Rummikub Original travel edition board game.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 31
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Share Alike
These models replace the old tile stand and improve the tile storage after finishing this board game. Your Rummikub game must have the same tiles in order for this model to function correctly. The tiles are around 3.5 mm thick, 26,8 mm in height and 18,8 mm wide.
All 4 tile stands with the legs stored in the back of them fit inside the original box snugly. The storage container also fits on the side.
I also provided the best print oriëntation for the parts. I printed mine with:
15% Adaptive cubic infill
Normal support for floating areas (2 storage spots for stand legs)
Outer Brim only (Prevents warping, let it cool down fully and wait until it falls off the build plate)
Outer Brim 5 mm and 0,05 mm away from part.
ESUN PLA+, Black