122 models
Simple Rummikub tiles you can print yourself! Even without a MMU! Any friends which color vision deficiency? Take a picture of all your filament colors and let them choose 4 colors they can distinguish! Now you can all play together :D…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
As we play Rummikub a lot we optimize our ways. We use the travel set with smaller tiles and I've designed custom, stackable stands with four grooves, so you can store each color separately. It is not a super easy print! You need a strong…
Print approx. €4.74–€5.79 excl. taxPreliminary estimate for one variant
100% scale pictured below, good for scrabble and rummikub
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
This is a remix from the Rummikub Tiles here on Printables. When printing it should print both colors on the same layer. First the numbers and after a manual color change the second color. Which than should print the rest of the tile.…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Leg for the holders of the tokens as part of the board game "Rummikub". The legs are a little longer than the original legs to give the holders more stability. Feedback Feedback? Ideas for improvements? Please leave a comment.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
The well known Rummikub game: easy to print, with a functional box including a lid, and tile holders which are stackable (and of course fit into the box, too). - included are three step files for being able to change logos etc. if you…
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
Om dat er bij de vrienden zo een houdertje kapot was heb ik het voorstel gedaan om het zelf te printen. Zonder ondersteuning verticaal geplaatst. Skirt 0. Brim 4. 0.30mm Draft. Because a holder was broken at the friends I made the…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant
The three-tiered stand that comes with the Rummikub Travel was too small for me. So I created this model that allows for an extra row and also fits in the original box. It's compatible with the original Rummikub Travel stand legs. If you…
Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant
Replacement support for Rummikub Twist stand
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Rummikub stand
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
This replaces the Rummikub poles for the storage board. While the original stand poles tend to loosen over time, this solution is clipped firmly onto the sides. For a cosmetic bonus, the .3mf file contains an example that adds custom text…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Three of the legs on my Rummikub rack broke, so I had to make new ones. While using the new legs, I even noticed a much
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
A simple Rummikub tile stand/holder with 4 slots, 9"x4.5"x1.25". Recommend printing at 0.20mm, 5%+ infill (10% under slots), no supports/brim. 3mf file provided for ease
This is a remix from the original rummikub game. Number of pieces: 106x Base 2x Numbers sequence (1 ~ 13) of each color (4x colors) - total 104x 2x coringas (normal or 9 3/4) This design doesn't require glue to connect the pieces. Take…
I made and printed this model for an acquaintance because their original set of was missing one leg and over years of usage, the crossed slots in the boards have been worn out a little causing the legs to fall out at the slightest nudge.…
minirummi: Travel-Sized Rummikub minirummi is a compact, travel-sized version of the classic tile-based game Rummikub. In Rummikub, players strategically arrange numbered tiles in runs and sets, aiming to be the first to use all their…
I recomend to use lubricate the moving parts The design don't require screw. You can choose to print the stand for my custom tiles, or print the larger on to use with the original Rummikub. print all the mirror and non mirror parts
My original Rummikub game only came with four racks/holders, but we often would like to play with five or six people. So I improved upon the original design by making it more sturdy. The original game came with enough tiles to allow for…
My first design in Fusion 360, I designed hese for my father in law, because old ones had broken. It was fun designing them and testing them to see if the distance betwen the rows was good and the angle the tiles leaned. I hope sobody…
printed with PLA / 0,2mm Original-Models made with FreeCAD / Files available as Download
Since we bought the Rummikub Classic, we've hated the boards that came with it. I wanted a holder that was steadier and as a bonus, could hold more tiles. This design has 3 rows that can hold 9 tiles each. Also they stack together quite…
Flip these stand legs and start placing the pieces of the game. Use them to replace the original ones if they broke off.
Tile holder to rummikub board game designed because I haven't been able to find an equal one. Print Settings Printer Brand: Anet Printer: E10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.23 Infill: 50 Filament: sunlu PLA orange…
This is a replacement leg that is identical to the original Rummikub game. There are 2 versions: rummikub-leg - sits pretty much perpendicular to the board rummikub-leg_angled - sits at an angle towards the middle of the board (like this…
Each column holds 7 tiles for a total of 56 tiles per box. Because I only have a MINI+ I had to create a smaller version of the box. There is a 1-piece version for those with bigger printers (I have not tested/printed it).
If you're missing a leg, you can just print one and play! You may need to print it between 100% and 103% to achieve a good fit.
My mother volunteers at a senior center. The ladies there are always up for a game of Rummikub. Unfortunately, the holders for the game pieces tend to break easily. Therefore, I designed a simple but more stable version.
Replacements for missing rummikub board support feet. There are two different styles, hopefully one might work for you. I made these for family members with different styles of Rummikub games. Both are easy and quick to print so you can…
Rummikub / Okey board stand. Attached a screenshot from Fusion 360 with the dimensions. Printed mine without top and bottom layers, so the infill shows.
This Rummikub holder has three lines and the chips can easily be stacked it is designed so that it fits into the original package printed without supports My kids liked it alot, as the chips to easily fell off the original holders. If you…
The Rummikub standard edition doesnt come with a box to hold the tiles in and i didnt like the use of a ziplock bag for the lid there are 2 versions 1 with text the other without to colour in the text is inlayed 0.1mm to allow the use of…
2x 1-13 je der vier Farben und 2 Joker
Print with low layer height from 1mm up for best quality. The balls are modifiers to create the dimple.
This model is updated to better hold the tiles. I was inspired by @ChuckB_84433, who made a remix of the old model. I decided to remake my original to make the tiles stay in better, have consistent chamfers, and have a better overall…
this is a replacement of a rummikub foldable stand you maybe need to push hard to get it in there
Spielsteinhalter für Rummikub. Flache und hohe Version für kleine oder große Steine.
I made this from scratch based on a model I tried from Hanes244. His was for the Mimi+ version and was too small for my tiles. This box in a 5x2 configuration and each slot holds 11 of the standard tiles. I have printed this and based on…
A replacement Rummikub stand for the flimsy standard ones. The feet fold out and click into place. Only 2 M3x16 screws required for assembly. Designed to be printed upright with no supports needed.
A compact and stackable rack tile for Rummikub. Each rack holds 40 tiles in four rows of ten. Four stacked racks measure under 2 cm in total height – perfect for travel setups and organized storage. Printing information The STL file is…
legs for Rummikub, I didn´t find one correct for this game version , so I modeled it. Print instructions Category: Toys & Games Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.4 Filament: doesn´t…
Dieser Rummikub-Ständer bietet jeder Farbe eine eigene Ebene. Dadurch lassen sich die Spielsteine übersichtlich sortieren und schnell finden. Perfekt, um das Spiel aufgeräumter und angenehmer zu gestalten. This Rummikub tile stand…
It is a Rummi box for https://www.printables.com/model/537564-rummikub-tiles-multi-color tile set printed on Bambu A1
Replacement part for an old rummikub leg. Printed in PLA with: Standing upright on the longer part 0.28 layer height 0 top/bottom layers 5 perimeters 0% infill Brim
Rummikub replacement leg for the Original version with a curved stand.
Just a simple rack support leg for the game Rummikub as someone asked me if I could replicate it for them. Just figured I would upload it incase anyone else happens to look for this version of it.
Replacement Rummikub tray, one solid piece about 330mm total length, fits on a 300x300 build plate diagonally. Holds 23 tiles in total.
Supportless as always. PETG 0.6mm nozzle recommended. No Infill needed, just walls.
RummiKub (supports more players) inspired by http://www.thingiverse.com/thing:1428474 There are two sizes of tiles, a travel size and the 30% larger original size. Each color has two sets of numbers but only one joker, as laid out in kit.…
With 56 of these coins you can play the Junior Rummikub rules with a normal rummikub set.
I remixed the model https://www.printables.com/model/197954-spare-support-leg-for-rummikub-tile-board because printing the sticks upright is a little bit tricky. Additionally, the feets in the original model resulted in a fit that use a…
No supports needed. Filament 1 is the color of the tile and filament 2 is the base of the tile. Enjoy!
Our friends and I like to play Rummikub. But the standard Rummikub game is for up to 4 players. And there's more than that of us. So I designed a set for up to 12 players. Now if I can just find a big enough table to play on .........…
Overview Purpose A simple, support-free 3D-printable replacement case and lift-on lid designed to match the footprint and function of an original Rummikub tile container. The model is intentionally minimal: a rectangular case body (the…
This is a general purpose tile holder that pretty much fills the print bed. I have print them in PLA with no (0) bottom layers which eliminates the warpage issues for me. I did the design with Fusion 360.
Ich habe mal einen neues Haltebrett entworfen, wo alle Farben, sowie doppelte Steine Platz haben. I once designed a new holding board that has space for all colors and double stones.
A replacement leg for the game board included in the Original Rummikub. Basically identical to the original part (without the rounded edges). Fits just as well.
A box to store chips of Rummikub board game.
Legs for the boards of the game Rummikub. Remix of maxmar's version; higher, wider and the part that connects with the board has been extended.
Complete set with stands and Stones The stands can be assembled with the side caps and form a box in which the Rummikub pieces can be stored. To be printed: all stones that is: 2x all bricks 1-13 in the colours red, black, blue and orange…
I made a quick leg for Rummikub boards that are around 14mm thick. I use it for older versions of rummikub; hope you can
The Classic version of the Rummikub game on Amazon did not come with a way to neatly store the tiles, so I designed this box and lid to store all 106 tiles. The lid is a little tight, so prying the lid from the corner seems to work best.…
Lost some so I copied the design and printed replacement feet for my 1980's Rummikub tile holder trays. Please help yourself if you miss some too. You Can Also Find Me On Instagram: http://www.instagram.com/baschz Webshop:…
This is a compact, stackable travel stand for tile-based games like Rummikub. I wanted to carry my game in a more compact form when I traveled, and the included tile stands were too big. The model is lightweight, compact, nest into each…
A replacement leg for the Rummikub stand/rack. Compared to the original I added small fillets to the part that interfaces with the rack. This should prevent it from cracking easily. I recommend printing with 3 to 4 perimeters instead of…
Supportless as always. PETG 0.6mm nozzle recommended. Fits well into the travel Rummikub case. Fits 22 tiles. The original stand is a bit smaller and fits fewer tiles. It also has legs that are a bit flimsy and one broke off.
I needed a Rummikub stand with more space for the tiles. This version is designed using Tinkercad and printed on a Bambu Lab A1 printer with SUNLU PLA. Size: 175mm wide, 45mm deep, 20mm high.
Just a simple tray for storing/organizing Rummikub tiles. Inner dimensions are 82mm x 165mm x 18mm.
Replacement leg for the Rummikub rack Print standing up, so it doesn't require supports 0.2mm layer height PLA+ 100% infill
These models replace the old tile stand and improve the tile storage after finishing this board game. Your Rummikub game must have the same tiles in order for this model to function correctly. The tiles are around 3.5 mm thick, 26,8 mm in…
My father asked me to build him a stand for Rummikub. The feet are attached with M2 screws. Nuts can be inserted in the stand when printing.
The tiles fit a little to loose for my liking, so I added a lower lip to hold the bottom of the tiles more snug. I also shaved some off the top to make it level across the entire surface for better printing. This STL should be now laying…
Travel Rummikub – Compact 3D Printable Set This lightweight travel edition of Rummikub is designed for easy packing and full gameplay wherever you go. The set includes: Tiles numbered 1 through 13 Jokers to keep things interesting…
Hello! Here i present to you my design of a pocket able rummikub version. This idea was born out of my intrest in the EDC world, having tons of useful and fun portable things with you at all time. I already had a deck of playing cards…
I scaled down the size of all parts proportionally to the travel rummikub tiles.
https://www.printables.com/model/61299-rummikub-tile
my dad enjoys rummikub a lot and loves when i play it but im kind of clumsy and i dont do well with small things so i made this in an hour or so it doesnt need supports (this is the first time i have ever been able to say that with…
We have a custom rummikub set bought off Etsy - better contrast numbers to be easier for colorblind players! But the tiles are very slightly thicker than normal and didn't fit well in the stands I downloaded and printed from this site -…
Los pies de la peana original se caen constantemente, así que diseñé estos más "apretados" Print Settings Printer: Sidewinder X1 Rafts: No Supports: No Resolution: 200 Infill: 25 Filament: PolyMaker PETG Notes: Yo los imprimo con 4…
A custom made Box model for My First Rummikub / Rummikub Junior Latch need to be printed 2 times Hardware You need: 30mm M3 Bolts (6x) If you really like my model and want to support me: https://www.paypal.com/paypalme/Rik2408
My kids broke all the legs to Rummikub game, so I designed and printed my own. If you are in a similar situation, please download, print and enjoy. Instructions Download Print Enjoy :) Category: Toy & Game Accessories
Rummikub leg for tile board Tips for printing: Filament: PETG or ABS Supports: No! Layer height: 0.16mm Infill: 10% Brim: No!
My parents have a rummikub game that is almost as old as me, and the stands started giving up. So I slapped together a quick stand. The print is intended multi-material, but you can also just remove the Text model and have the stand print…
Made an insert to minimize the rattle from the game tiles and tile holders for my Rummikub travel game. A bit smaller than the inside of the metal box since i found out that the vary in size for some reason.
A better replacement for the original rummikub feet. I improved the feet a bit to make the stands more sturdy. It was quite an old rummikub game, so check the pictures, if it fits yours too.
Yet another Rummikub stand: Just the right elevation for the 2nd row Easy to grab Tiles will not fall of the stand (like on the original) 4 more tiles than on the original Prints on Prusa Mini and above without support and minimum…
We have a very old Rummikub game at home that comes with really flimsy trays. This is a replacement tray for Rummikub tiles of the size 27mm x 19mm x 3.5mm. Special features: The tray has a firm stand. It has flip out/in feet. It has end…
I really liked Guichiang's Rummikub design. However, I did not trust my printer to print the bottom pattern with enough consistency that you'd be unable to tell any tiles apart. As such, I removed the logo completely. I also wanted to…
