1 / 5
Ingenic A1 NVR Case (new board)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for Ingenic A1 NVR with a different layout of ports.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 1
- Views
- 244
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
It's a development of a legacy model fitted to new PCB and ports layout.
I include two cutouts that will let you fit-test the board without spending much time and plastic on printing the full model.
To mount the NVR board to the bottom part, you will need 3 pcs of brass thread knurled nuts M3x3x4.5 and 3 pcs of M3 bolts. Use 4mm wide plastic zip tie to hold SSD in place. To attach top to bottom use 4 pcs of brass thread knurled nuts M2.5x4x3.5 and 4 pcs of M2.5 bolts.