1 / 10
X0240104 Roof rack cross bar support cap Citroen — image 1
1 / 10

X0240104 Roof rack cross bar support cap Citroen

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Roof rack cap for Citroën or Peugeot (part number X0240104). Printed in one piece. There are two options - with the…

Rating
0 / 5
Likes
2
Downloads
13
Makes
0
Views
71
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Roof rack cap for Citroën or Peugeot (part number X0240104). Printed in one piece. There are two options - with the "CITROEN" lable and without it. Print the one you like more.

❗After printing, remove the supports carefully, otherwise the latches may break off. ❗Be careful: after installing the cap, it can only be removed using a tool, which will likely lead to the caps breakage.


Крышка багажника на крышу Citroën или Peugeot (номер детали X0240104). Печатается одним фрагментом. Есть два варианта - с надписью “CITROEN” и без надписи. Напечатайте тот, который вам больше нравится.

❗После печати постарайтесь удалять поддержки аккуратно, иначе защёлки могут отломаться. ❗Будьте внимательны: после установки крышки, её можно снять только с использованием инструмента, что вероятно приведёт к поломке крышки.

💥 Donations can be made here: https://boosty.to/prosmp/donate 💥All our contact information in one place: https://hipolink.me/prosmp

YouTube channel: https://www.youtube.com/@prosmp Our Telegram channel: https://t.me/prosmp VKontakte group: https://vk.com/pro_smp

Print Settings

Printer Brand:

Bambu Lab

Printer:

Bambu X1C

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

15%


Notes:

3 perimeters
5 bottom and top layers
50 mm/sec outer wall
40* for support threshold angle
0,15 mm Top Z-distance
2 mm Support pattern distance
3 top interface layers
0.3 mm distance between interface lines
0 mm brim-object gap

❗Glue stick is required!
In the orientation as on the photo the top surface is the smoothest.

❗Клей обязателен!
В ориентации, как на картинке, верхняя поверхность получается наиболее гладкой.

Category: Other

Tags