1 / 10
X0240104 Roof rack cross bar support cap Citroen — zdjęcie 1
1 / 10

X0240104 Roof rack cross bar support cap Citroen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Roof rack cap for Citroën or Peugeot (part number X0240104). Printed in one piece. There are two options - with the…

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Roof rack cap for Citroën or Peugeot (part number X0240104). Printed in one piece. There are two options - with the "CITROEN" lable and without it. Print the one you like more.

❗After printing, remove the supports carefully, otherwise the latches may break off. ❗Be careful: after installing the cap, it can only be removed using a tool, which will likely lead to the caps breakage.


Крышка багажника на крышу Citroën или Peugeot (номер детали X0240104). Печатается одним фрагментом. Есть два варианта - с надписью “CITROEN” и без надписи. Напечатайте тот, который вам больше нравится.

❗После печати постарайтесь удалять поддержки аккуратно, иначе защёлки могут отломаться. ❗Будьте внимательны: после установки крышки, её можно снять только с использованием инструмента, что вероятно приведёт к поломке крышки.

💥 Donations can be made here: https://boosty.to/prosmp/donate 💥All our contact information in one place: https://hipolink.me/prosmp

YouTube channel: https://www.youtube.com/@prosmp Our Telegram channel: https://t.me/prosmp VKontakte group: https://vk.com/pro_smp

Print Settings

Printer Brand:

Bambu Lab

Printer:

Bambu X1C

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

15%


Notes:

3 perimeters
5 bottom and top layers
50 mm/sec outer wall
40* for support threshold angle
0,15 mm Top Z-distance
2 mm Support pattern distance
3 top interface layers
0.3 mm distance between interface lines
0 mm brim-object gap

❗Glue stick is required!
In the orientation as on the photo the top surface is the smoothest.

❗Клей обязателен!
В ориентации, как на картинке, верхняя поверхность получается наиболее гладкой.

Category: Other

Tagi