1 / 2
Horizontal bike wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalistic way to hang your bike
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 94
- Makes
- 0
- Views
- 1,984
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was requested by a friend of mine and is inspired by a beautifully designed but very pricey bike wall mount. However, I built an individual version myself from scratch and am happy with the result. So let's share it.
- In the .3mf I defined a cyclindrical area around the screw with elevated infill % so the screw doesn't damage the print.
- I printed it in ASA and it's strong enough.
- I recommend Gyroid as infill pattern
- Diameter of the wooden stick: 25 mm
- The stick's length is flexible. I cut a 1 m stick in three pieces and used two of them (so ~33 cm)
- Assembly: Mount the holder onto the wall, put the stick into the hole and you're done. (;