Replacement Latch/handle for Regalo Easy Step 36" Extra Tall Walk Thru Baby Gate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in ABS with supports @ a 0.20 layer height
- Rating
- 5 / 5
- Likes
- 1
- Makes
- 1
- Views
- 179
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Standard Digital File License
This replaces the original handle on the gate for when it cracks and breaks. This only works with the original version of the gate with the red lock at the end of the handle(See picture). It was modified slightly from the original design to allow it to be more durable, print easier, and remove any unnecessary complexity.
I do not recommend PLA/PETG, I have used that in the past and they only last a couple of months before the pins break off.
Print Settings
100% infill
supports and brim
Print in ABS/ASA
Installation Instructions
Remove the old broken handle
save the nut and bolt
slightly stretch the new handle over the gate to get it to fit into place
reuse the old nut and bolt to attach the new handle
don't tighten too much, only until the locknut is engaged. Threads will be flush with the end of the lock nut.