Raspberry Pi Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a camera mount that isolated the camera from moving parts of the printer. I designed this to clip on to the…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 50
- Makes
- 0
- Views
- 784
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I needed a camera mount that isolated the camera from moving parts of the printer. I designed this to clip on to the edge of the table my printer is on. This camera stand is based on https://www.thingiverse.com/thing:2267182/files Camera_mount.
I have included several versions of the arms so that you can choose what you need. I used 2 of the 98mm parallel arms on my printer. The bracket is designed for a table that is 20mm thick.
You will also need M3 hardware at each joint and M2 hardware to mount the camera module.
STPs included for both parts so you can change them if needed.
If you would like to support me: https://ko-fi.com/tinyboatproductions