DIN rail tool holder base (modular)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool holder base for use with DIN 35/7,5 rails.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Model contains a single (15 mm wide) and a double holder (40 mm wide, 24 mm hole distance) and they are to be used with 35/7,5 DIN rails.
It's primarily made with the idea to put a melt in / Ruthex threaded insert (M4 x 6 mm) into the holder you would like to attach this base to and then screw them together with a M4 x 12 mm countersunk screw.
Single can be utilized standalone, if you add constraining wings / geometry to your holder, so it can't rotate after tightening.
You can find holders made by me to fit this base, but they also come with .step files, so you can modify / make your own.
Print it from PET-G, since it requires some flex to attach it to the rails.
Recommended settings: 2 walls, 20% infill