1 / 2
FanCover for Anycubic Vyper Dual 5015 V2 Rev2 when using Revo Six Hotend — image 1
1 / 2

FanCover for Anycubic Vyper Dual 5015 V2 Rev2 when using Revo Six Hotend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mesh fan cover for Anycubic Vyper Dual 5015 V2 Rev2 in case you switch from the default Volcano V5 to a Revo 6 Hotend

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
92
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I printed the Butterfly printhead fro my AC Vyper which was created by "DerLatzer" on Thingiverse https://www.thingiverse.com/thing:4974423 which worked pretty good for me, as long as I was using the factory VolcanoV5 Hotend.
After switching to the E3D Revo Six hotend which requires an adapter to be mounted, I found out, that all available adapters are a little longer than the factory hotend and the Coldend is not perfectly cooled because the fan sits a little too high.
So I created a FanCover which lowers the fan a little which now cooles the entire Coldend

Additionally I used 2 M3x25 screws an nuts to mount the fan to the Fancover. I designed it with 4 holes, but two are enough to.

I designed it for my 40x40x20 fan, but I will also upload a version for the 40x40x10 stock fan. There you can use M3x16 screws.

Tags