1 / 2
Synology DS920+ NAS Front Plate for DeskPi Rackmate T1 — image 1
1 / 2

Synology DS920+ NAS Front Plate for DeskPi Rackmate T1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Front plate designed for the 10inch DeskPi RackMate T1 which houses a Synology DiskStation 920+ NAS.

Rating
5 / 5
Likes
59
Downloads
358
Makes
1
Views
8,241
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

I designed this front plate to house my Synology DS 920+ at the bottom of my RackMate T1. Included Keystone and non-Keystone versions.

After a few failed prototypes (RIP my filament), I finally got the measurements right. The DS920 is pushed to the far right against the aluminium strut - which visually puts the drives dead centre, which is nice. Then because of this, there’s plenty of room on the left - so I utilised the space by adding keystone holes, so you can bring your Synology's rear USB and Ethernet to the front if you want to. There are cutouts for the lights, USB and Power Button, too - all subtly chamfered :-D

Inspired by this model from @crambles, it should fit other DS models with the same dimensions, too.

Just FYI. the Synology sits on the bottom shelf that the Rackmate T1 comes with. See the link above for an idea of how much the DiskStation protrudes at the back. In my case, everything is very snug and so I don't worry about the Synology sliding out of the back, although back brackets may be an option.

Any questions - I'll probably see at some point so ask away! :D

Tags