FlashForge AD5X Anycubic Spool Adapter (Flange Update)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cylindrical spool adapter for anycubic spools for the FlashForge AD5X IFS
- Rating
- 4.857 / 5
- Likes
- 137
- Downloads
- 1,693
- Makes
- 4
- Views
- 5,098
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
I noticed that the IFS wouldn't grab onto the spool correctly when I was using Anycubic filament I had purchased on Amazon. I decided to create an adapter, which seems to work perfectly and hasn't caused any issues after further prints.
For added compatibility:
Print with fuzzy skin for easier grip onto the spool & outer brim for build plate adhesion
(Settings for recommended above settings 15% infill included in .3mf, sliced with OrcaSlicer-FlashForge)
Technical details:
Main cylinder:
- Inner diameter: 55.55mm
- Outer diameter: 72.40mm
- WxLxH = 72.40mm x 72.40mm x 64mm (-4mm to H on thinner version)
Flange:
- 82mm diameter (17.6mm additional from Main Cylinder Outer dia.
- Approx. 6.00mm thick (aprox. 3mm on thin version)
Approximate print time with above sliced 3mf on AD5X: 2.25 hours
Changelog:
21/10/25
Flange added
26/10/25
A thicker version of the flange has been created, new technical details are above. (Swapped thicker version to be recommended/main one) 15% infill has been included instead of 10%