1 / 7
Notos 10 shot 22 magazine Remix 5x2mm magnet v2.0 — image 1
1 / 7

Notos 10 shot 22 magazine Remix 5x2mm magnet v2.0

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

10-shot Magazine for the Umarex Notos. Only needs a center screw. No sanding, smooth spin.

Rating
5 / 5
Likes
24
Downloads
222
Makes
0
Views
962
Reviews
1

Updated at source:

Model information

License
GNU General Public License v2.0

*Updated Aug. 24, 2025*

After a few prints and some trial and error, I have made version 2.0 of this remix. I modified several things to make the wheel spin smoothly. I also changed the assembly instructions (original instructions PDF is also included). 

Magazine Assembly Instructions:

1. Print all files with NO supports. The magnet can be added to the main body after printing. The fit will be snug enough that it should not require glue (probably not a bad idea to add a tiny drop of super glue in there). Test fit everything to ensure smooth operation.

2. Install an M3xL4xD4.2 heat set insert into the main body.

3. Use the spring out of a cheap retractable badge holder. Cut a piece of spring 12-14
inches (30-35cm). Bend the ends to fit in the mag wheel and the flat notch on the main body (see pictures).

4. Install a Nitrile Rubber O-Ring 31mm OD 27mm ID 2mm width on the center wheel. I don't think these are necessary, more of a "nice to have" for comfort option.

5. Wind the spring tight inside the mag wheel (not the main body as stated in the original instructions). This method worked better for me because it puts the spring where it needs to end up (your mileage may vary). 

6. This is the trickiest part! Carefully hold the spring in place with one hand/finger and pull out the inside part of the spring; one or two inches (3 to 5 cm) should be enough. Now insert the bent end into the main body, spin the wheel to tighten the spring, and attach the wheel to the main body.

7. Add the top plate and use an M3x4mm screw in the middle to keep it all together.

There is a YouTube video that follows the original instructions (skip to the 10-minute mark to see the spring portion). I attempted it this way many times, but ended up completely frustrated.

Good luck and enjoy!

– Thanks to William Hemmingsen, B_eazy01, and Red Corn Outdoors for the inspiration.

Tags