Handlebar Mount for Garmin Devices or Compatibles - short
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handlebar Mount for Garmin Devices or Compatibles. Fits to ø35mm handlebars without adapter or smaller ones with adapter
- Rating
- 5 / 5
- Likes
- 95
- Downloads
- 240
- Makes
- 2
- Views
- 1,488
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Object description
Handlebar Mount for Garmin Devices or Compatibles.
The parts fit directly to a bar diameter of 35mm. For smaller diameter, you can find an adapter in the folder “Optional Parts”. The flat adapter is intended to be printed with flex-material.
Depending on where you want to position the device, two versions are provided. A lower and a higher one.
If you need the overhang in the other direction, mirror the main part in the slicer along the X- or Y-axis.
All models have a predefined supports.
For best strength, please print the parts in the recommended and predefined direction.
If you are looking for a long version, look here: Garmin long mount
Update 2025-08-15:
Segmented adapter dia. 35,9mm to dia. 31,9mm added for those who don't have flex material. You need two of them.
Bought parts:
3x Thread insert M3
1x Hexagon nut M3
2x Hexagon socket screw M3x8
1x Hexagon socket screw M3x10
1x Hexagon socket screw M3x14
Assembly instructions:
See attached picture.
Melt in the threaded inserts flush or slightly recessed.
Secure all screws with a drop of threadlocker.
Suggested print settings:
Material: ABS/ASA, PETG
Resolution: 0,2mm
Infill: 30%
Perimeter: 4
Support: yes, predefined