Handlebar Mount for Garmin Devices or Compatibles - short
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handlebar Mount for Garmin Devices or Compatibles. Fits to ø35mm handlebars without adapter or smaller ones with adapter
- Ocena
- 5 / 5
- Polubienia
- 93
- Pobrania
- 237
- Wydruki
- 2
- Wyświetlenia
- 1476
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Object description
Handlebar Mount for Garmin Devices or Compatibles.
The parts fit directly to a bar diameter of 35mm. For smaller diameter, you can find an adapter in the folder “Optional Parts”. The flat adapter is intended to be printed with flex-material.
Depending on where you want to position the device, two versions are provided. A lower and a higher one.
If you need the overhang in the other direction, mirror the main part in the slicer along the X- or Y-axis.
All models have a predefined supports.
For best strength, please print the parts in the recommended and predefined direction.
If you are looking for a long version, look here: Garmin long mount
Update 2025-08-15:
Segmented adapter dia. 35,9mm to dia. 31,9mm added for those who don't have flex material. You need two of them.
Bought parts:
3x Thread insert M3
1x Hexagon nut M3
2x Hexagon socket screw M3x8
1x Hexagon socket screw M3x10
1x Hexagon socket screw M3x14
Assembly instructions:
See attached picture.
Melt in the threaded inserts flush or slightly recessed.
Secure all screws with a drop of threadlocker.
Suggested print settings:
Material: ABS/ASA, PETG
Resolution: 0,2mm
Infill: 30%
Perimeter: 4
Support: yes, predefined