Enlarged Container For Fire Starter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.44 – €1.76 net (excluding VAT)
For file: container_body_0.6n_0.4mm_PETG_MK4S_49m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.60 excluding VAT (range midpoint).
- Weight reported by the author
- 39 g
- Print time reported by the author
- 48.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the same container, except the square walls inside are removed and the inner diameter is increased to give room.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is the same container, except the square walls inside are removed and the inner diameter is increased to give more wiggle room for the wax blocks. I found the original that I printed had what seemed to be zero tolerance for the blocks which made them a very tight fit.
This remix still fits the original lid so its fully compatible.