1 / 6
Voron 0.2 Exhaust Fan with charcoal filter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Exhaust Fan with charcoal filter for Voron 0.2
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Voron 0.2 Exhaust Fan with charcoal filter for 100mm tophat. Can also fit the 80mm tophat it you cut the base plate in the slicer (Not scaling).
During printing, my Voron tend to get really hot. That's why I made a exhaust fan to keep chamber temperature at a constant level. I made one without filter but with ABS, even with the nevermore running the smell was noticeable. So I made one with a charcoal filter.
With a temperature sensor in the chamber it is easy to control chamber temperature.
3 x Removable support.
There is also one model without filter.
BOM:
- 1 x 5015 Blower fan.
- 2 x M3 x 20 screw.
- 2 x M3 nut.
- Charcoal