1 / 6
Voron 0.2 Exhaust Fan with charcoal filter — zdjęcie 1
1 / 6

Voron 0.2 Exhaust Fan with charcoal filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Exhaust Fan with charcoal filter for Voron 0.2

Ocena
0 / 5
Polubienia
4
Pobrania
9
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Voron 0.2 Exhaust Fan with charcoal filter for 100mm tophat. Can also fit the 80mm tophat it you cut the base plate in the slicer (Not scaling).

During printing, my Voron tend to get really hot. That's why I made a exhaust fan to keep chamber temperature at a constant level. I made one without filter but with ABS, even with the nevermore running the smell was noticeable. So I made one with a charcoal filter. 

With a temperature sensor in the chamber it is easy to control chamber temperature.

3 x Removable support.

There is also one model without filter.

BOM:

  1. 1 x 5015 Blower fan.
  2. 2 x M3 x 20 screw.
  3. 2 x M3 nut.
  4. Charcoal

Tagi