1 / 3
Lenovo m720q bracket for Connectx-3 single 10G card — image 1
1 / 3

Lenovo m720q bracket for Connectx-3 single 10G card

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple bracket to install a Mellanox Connectx-3 EN mcx311a in a lenovo tiny m720q or m920q

Rating
0 / 5
Likes
4
Downloads
42
Makes
0
Views
326
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

This is a very simple bracket to install single port Mellanox Connectx-3 card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins and weld in place with either a soldering iron or any heated instrument. It's designed to allow placement of two holding screws, one from the side of the case and one in the back from the inside. You will likely need to do some minor trimming with a scalpel blade to have a perfect fit for the bracket in the case.

This bracket was designed with large airflow holes, to be used in tandem with Matthew Neuforth's fan shroud. Since the connectx-3 cards are somewhat power hungry, I would advise against using them in the Mx20q machines without additional cooling.

Tags