Notebook stand for 14" Laptops
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stand for 14" laptops, up to 24mm in thickness.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is a laptop stand designed to hold a 14" machine, up to 24mm (roughly 1in) thickness. I've tested it mostly with Lenovo's T14 g4/5, E14 g5/6, or dell 7450 notebooks. The base is 130x130mm, total height 96mm. Using 20% infill, total print weight is about 100-105g.
Print settings:
PETG, infill 20%, at least 3 horiziontal solid layers depending on layer thickness and extrusion width. You want the vertical pieces to be almost solid, to hold good strength and best stability.
Post processing:
If needed, heat up the top parts with a heat gun and adjust them slightly to hold the notebook more securely.