Button Cell Battery Box (In-Slicer Magnet Customizer) [CR2032 + LR44]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Button Cell Battery Box with Windows.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Button Cell Battery Box [CR2032 + LR44] with Window and Finger Grip.
Prints Tested With
Material: PLA
Infill: 5% 3D Honeycomb
Support: None
Happy Printing!
*Advanced printing steps for adding magnets
Magnet Guide:
On PrusaSlicer:
Download the Slicer Project with Starter Magnet Slots.3mf file and adjust the negative volume based on your magnet size. (Don't forget to adjust the volume's position when adjusting the size.)
Other Slicer:
Add a negative volume (cylinder) to your model to cut out the slot for the magnet.
Follow these instructions for a magnet slot with a diameter of 6 mm and a depth of 3mm.
Then you can adjust the negative volume according to your magnet size. (Don't forget to adjust the position when adjusting the size.)
Lid:
4 Negative Volume (Cylinder)
Size: 6 mm diameter, 3 mm thick.
Object Coordinates
x:-35.1 y:27.55 z:5.93 | x:35.1 y:27.55 z:5.93 |
x:-35.1 y:-27.55 z:5.93 | x:35.1 y:-27.55 z:5.93 |
Tray:
4 Negative Volume (Cylinder)
Size: 6 mm diameter, 3 mm thick.
Object Coordinates
x:-35.1 y:27.55 z:1.55 | x:35.1 y:27.55 z:1.55 |
x:-35.1 y:-27.55 z:1.55 | x:35.1 y:-27.55 z:1.55 |
