JetKVM 5.25" Flush Mount v13
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
JetKVM mount into a double high 5.25" bay with screen flat to front
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 44
- Makes
- 1
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
Computer bay mount for JetKVM. Fits into a double-height 5.25" bay.
The JetKVM itself is now flush(ish), so it doesn't stick out so much.
Additional parts:
JetKVM & ATX Power Control
Mounting bolts for the JetKVM: 2x M2x16, socket head
Numerous sources
Mounting inserts: 6x M3xH4
Hard drive screws: 6x M3 coarse
This should be your typical hard drive screw
2 hold down the ATX Power Control board
4 are for holding the bracket in the cage
Optional if your case has a toolless system
Zip tie
Holds down the other end of the ATX Power Control board
Possibly optional
Cabling
The RJ11 cable that came with the JetKVM
You may want to chop up a power-only USB-C cable to power the JetKVM from an always-on source (eg, +5VSB from the computer power supply)
Plug into the ATX Power Control board
v13 added a grid of holes to zip tie/bolt any additional hardware you wanted.