1/4 Inch to Quadlock (for Magic Arm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Model 1 is an ¼ inch to Quadlock base adapter. You can combine Model 1 with any of the original quadlock mounts (e.g. magsafe or charging heads) or print a basic one yourself (Model 2). No supports needed. Printed with 0.10mm Layer Height. Stop at Layer 172 or a little later.
Material required:
1x M5 nut (pause and resume print after having the nut added)
1x heat insertable ¼ inch thread (e.g. this)
Model 2 a basic quadlock mount compatible with Model 1 or the original Quadlock bases. Tight fight!, screwing it on might be required depending on material and printer. Additional material required:
1x M5 sunk head screw
Adapter for a gimbal or tripod:
Adapter for GoPro prongs:
If you use a MAG Case and prefer to not have an orientation lock, you can just buy a simple ¼ inch screw to MAGSAFE adapter.