1 / 2
Butterfly Knife / Balisong
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix based on Benchmade 62 Balisong Butterfly Knife.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 121
- Makes
- 0
- Views
- 727
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Remix version of butterfly knife / balisong based on Benchmade 62 Balisong Butterfly Knife M3 Fasteners.
- Easy to print - no support needed.
- Files are oriented - recommended to print with the orientation on stl files.
- Infill 40%, Wall 3 lines, 0.4mm Nozzle.
BOM:
- M3 x 10 SHCS (BHCS is also fine) x 4
- M3 hex nut x 4
Assembly Instruction
1. (Optional) Push diameter 3mm x 30mm metal rod into blade part
- It will snap in place.
- Might feel a little resistance when pushing it in. You can place the metal rod face down, and press the whole part against a flat surface.
2. Insert M3 hex nut into hexagonal holes in handle_bottom parts
- If it is a little too tight to push nut in, try pushing against a flat surface, and then use screw pulling technique from the other side.
3. Installing handle pins
- Insert printed pins into the slots on handle_bottom parts
4. Put the parts together
5. Secure by using M3 x 10 screws
6. Done!
