DSPIAE Reciprocating Sander Toolhead set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted some larger toolheads for my new DSPIAE sander and came up with this useful (to me) initial set.
- Rating
- 4.5 / 5
- Likes
- 48
- Downloads
- 279
- Makes
- 1
- Views
- 1,006
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted some larger toolheads for my new DSPIAE sander and came up with this initial set. These work very well for me and are a nice start at developing a more complete toolhead set than provided by the manufacturer of this neat little reciprocating sander. I'll be adding more toolhead variants here as I come up with them, so check back in the future if you find these useful.
I used some thin light duty Velcro tape, hook side (links below) on the toolheads and some loop backed light sanding paper to allow easy sand paper changing. I also print up a bunch of the same size toolheads that allows me to load up a progressive set of grits and quickly swap toolheads as progressing up the progression.
I print these with PETG and they work perfectly printed at a 0.2 height. But I print them at 0.12 which result in something resembling the factory molded parts.
https://www.amazon.com/dp/B0013AIAQ2?ref=ppx_yo2ov_dt_b_fed_asin_title
https://www.amazon.com/dp/B0DFC8BSQ3?ref=ppx_yo2ov_dt_b_fed_asin_title