GMT400/GMT800 4.3 Vortec Intake Hat to Throttle Body Gasket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits 4.3 V6 Vortec Intake hat. Approx. 4" diameter.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 52
- Makes
- 2
- Views
- 625
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Designed for 4.3 V6 Vortec on pre 2000 gmt400/800 GMC/Chevrolet Pickup trucks. Must be printed with 95a or less TPU, 2 walls, 30% gyroid infill, and 0.16 layer height. I also recommend setting seam to random to reduce the possibility of leaks. Use dielectric grease or motor oil on gasket during installation to prevent it from getting pinched and to ensure a good seal. Scale may require tweaking depending on your printer's dimensional accuracy. Most TPUs should be able to handle the heat of the engine bay, HF TPUs may deform under intense heat due to additives. My gasket was printed with Overture 95a TPU. I kinda suck at blender so the topology definitely isn't the best lol. Also if your looking for an OEM part# well, it doesn't exist. Thanks a lot GM! 🙄
