Tadpole 2.5'' whoop style (alternative) mounting bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting bracket that allows mounting 25x25mm whoop boards with USB plug pointing down on a Tadpole 2.5''
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Armattan provides a 1mm carbon mounting bracket to be able to mount ‘whoop style’ AIO boards, which have a 25x25mm mounting pattern. Unfortunately, their bracket does not leave enough room for the USB plug of many boards, where the plug points down.
Of course you can try mounting the board with the plug pointing up, but that makes building and maintaining more complicated, because most boards have the pads for connecting camera, vtx and motors on the (now) down-facing side.
Altogether this severely limits the choice of boards.
This bracket here should be printed in a sufficiently stiff plastic. It's default height is 2mm, but you can scale it up and down easily in the slicer.
In addition to the two stack screws that fix the bracket to the frame, two additional holes are provided, which help securing the bracket more tightly, they use the original 16x16mm holes.