Counting matching models…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Side Clamp camera mounting solution. Not super elegant but very solid! 25 degrees camera angle.
The AGGRC Flexi-Sperm/Tadpole was designed as a playful and educational 3D print to support outreach efforts. This flexible design was remixed by Brittany Ratliff at the AGGRC to help engage audiences in biology and open-source science.…
The Tadpole lure is designed for effective fishing of predatory fish such as pike and zander. Its elongated, graceful body, devoid of active elements, imitates the movement of natural prey in the water.
this can be used as bait or just a little tadpole to put on your shelf. There are different sizes. This is my first model so sorry that it looks a little weird. They are all different sizes so 2 is smaller and 3 is smallest. People I need…
Depending on how much antenna sticks out you can cut it to length. Works well with TBS Triumph when VTX is at the back. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 100 Filament: SainSmart TPU…
Antenna mount for full size Immortal T Mirror the second print. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 100 Filament: SainSmart TPU Category: Other
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Updated design: https://www.thingiverse.com/thing:4910295 Mount for the big boy CRSF antenna, works with Armattan Tadpole. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25%…
Armattan Tadpole parts Part 1 - 25.5 x 25.5 stack top Designed to fit HDZero - whoop board With mounting space for Happymodel ELRS - PP / EP2 Material - ABS V1 is the same as V2 other than enabling the HDZero board to fitter at 90 degrees…
I wanted a solid mount for my Insta360 Go 2. The base screws into the existing front cage mounting bolts and takes a small zip tie in the front to fully secure it down. The bolt hole is for a standard m2 screw and the nut should recess in…
Print in TPU with 0.2 layer height. I used regular supports, snug, rectilinear base pattern.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Adapter for Mamba F411 AIO Board Category: R/C Vehicles
Wanted to get some Protection without too much weight, would like some feedback if someone is interrested in changing some details. Used https://www.thingiverse.com/thing:4036637 for the Connecting part but turned it around and build…
The North Face Tadpole SL 2 uses Velcro ties to secure the archway pole. These clips use the velcro that is already there to improve how the archway pole attaches. I used 16mm m3 bolts and m3 heat inserts. When doing the heat inserts make…
This is a small mount for the Armattan Tadpole 3" intended to hold a stock TBS Crossfire dipole antenna at a 120 degree bend. Inspiration credit obviously goes to Mr. Steele. While this is definitely less efficient than a straight dipole…
Use the split-into-parts feature in Bambu Studio to print in multicolor.
Updated design: https://www.thingiverse.com/thing:4910323 TBS Unify Pro32 Nano + Frsky R-XSR mount for Armattan Tadpole. More details: https://rotorbuilds.com/build/24332 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Works nicely with 16x16 aio boards / stacks. Used in https://rotorbuilds.com/build/27708 . If you need a space for capacitor on the side, print the version with a cut out. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes…
I created this antenna mount for the Armattan Tadpole to make sure the antenna stays out of the props and is always upright for better reception. The coax clips in the back, zip ties are not required but male sure the antenna stays in…
Initial Rough Sketch of a Tadpole family of vehicles with my kids. The next objective will be to figure out how to use an airfoil tool to generate a better rear propeller and to apply the appropriate wing taper to look like a Manta Ray.
Uses gridfinity to keep the stuff in place in case of flow and easily swapped to adjust depend on needs.
The Tadpole lure is designed for effective fishing of predatory fish such as pike and zander. Its elongated, graceful body, devoid of active elements, imitates the movement of natural prey in the water.
I created this antenna mount for the Armattan Tadpole to make sure the antenna stays out of the props and is always upright for better reception. The coax clips in the back, zip ties are not required but male sure the antenna stays in…
Super quick tinkercad model to get a new Tadpole mounted to a monitor. Lots of room for improvement. It's ugly but it works.
this can be used as bait or just a little tadpole to put on your shelf. There are different sizes. This is my first model so sorry that it looks a little weird. They are all different sizes so 2 is smaller and 3 is smallest. People I need…
Print in TPU with 0.2 layer height. I used regular supports, snug, rectilinear base pattern.
if you want to know how to make your own version of the mob then, 5 mm = 1 pixel 2 mm = a half pixel if mouth or something for depth remove 0.50 mm if mob looks like it has bits that are sticking out like a frog mouth then just simply add…
These boots work for the Tadpole 2.5'' and should work for the HD version as well. They serve as bumpers to protect the carbon as well as landing pads. They also protect the motor screws very well, which was one of my beefs with the…
Armattan provides a 1mm carbon mounting bracket to be able to mount ‘whoop style’ AIO boards, which have a 25x25mm mounting pattern. Unfortunately, their bracket does not leave enough room for the USB plug of many boards, where the plug…
Modified a great part for the Armattan Tadpole so that you can mount your DJI 04 Lite antenna.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Sculpture of a Frog and a Tadpole by KelseyA from 3D Modeling and Design at the NSYMCA, Winter 2023
To assemble, the main idea is to attach 2x of the lanterns to PVC and put remote control LED strips on the inside. Works really well. The experimental lantern base looks cool but the light strips barely attached. You need to print a…
Super quick tinkercad model to get a new Tadpole mounted to a monitor. Lots of room for improvement. It's ugly but it works.
Made to mount the new Opal Tadpole ‘laptop only’ webcam to a regular desktop monitor. Nothing fancy, but it works!
