1 / 2
Gitfox GAT562 Solar Mesh Relay solderless flashing jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Not trusting OTA updates for these little devices, I decided to design a jig for flashing them.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 0
- Views
- 501
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the upper and lower clamp parts from the original model, and this pin holder will slide right into the end of the upper clamp section. https://www.printables.com/model/772188-pogo-pin-clamp
https://s.click.aliexpress.com/e/_oEMnoOv is the device I'm talking about, or one of the sellers for it, there seem to be plenty on aliexpress.
Solder the pogo pins in place, or you won't be able to get them in afterwards. Be quick though, you don't want the heat to soak down the pin and melt the plastic.