Dead Kennedys concert flyer/poster hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vintage concert flyer transformed via hueforge for your printing pleasure
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 10
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: OGDK.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 155.6x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Overture Cement Gray Transmission Distance: 0.6
PLA Overture Light Gray Transmission Distance: 0.7
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Cement Gray
At layer #15 (1.28mm) swap to Light Gray
At layer #21 (1.76mm) swap to White for the rest.