Sigmund Freud hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a portrait of the man himself
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 8
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: psychedelicfrood.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 145.08x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Overture Cement Gray Transmission Distance: 0.6
PLA PolyTerra Lavender Purple Transmission Distance: 0.5
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA Overture Matte Grass Green Transmission Distance: 3
PLA Prusament Galaxy Green Transmission Distance: 3.2
PLA+ Sunlu White Transmission Distance: 5
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Charcoal Black
At layer #9 (0.8mm) swap to Cement Gray
At layer #12 (1.04mm) swap to Lavender Purple
At layer #14 (1.2mm) swap to Grey
At layer #16 (1.36mm) swap to Grass Green
At layer #19 (1.6mm) swap to Galaxy Green
At layer #21 (1.76mm) swap to White for the rest.