1 / 5
iFixit Mako 1/4" Pegboard Mount — image 1
1 / 5

iFixit Mako 1/4" Pegboard Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€2.74 – €3.35 net (excluding VAT)

For file: (right)ifixit_mako_pegboard_mount_0.4n_0.25mm_PLA_COREONE_1h57m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.05 excluding VAT (range midpoint).

Weight reported by the author
61 g
Print time reported by the author
1.95 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Storage for the Mako iFixit Toolkit on a 1/4" Pegboard Mount

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

I wanted a slightly more space efficient tool storage solution for the iFixit Mako toolkit which is why it is oriented sideways. I also included a more standard orientation. I use off the shelf expanding pegs for ¼" pegboard as I've found them to be more reliable and consistent compared to 3D printed pegs.

Required Hardware

QTY 2 expanding pegs are required for the current design but it can be remixed to add more mounting holes if required. The counter bores on the bottom side of the mount are intended to let the expanding pegs pull partially away from the pegboard forcing pegs to lock in place, leading to a snug fit.

Misc

I've included universal files and the base Solidworks file to enable easier remixing.

Tags