1 / 5
iFixit Mako 1/4" Pegboard Mount — zdjęcie 1
1 / 5

iFixit Mako 1/4" Pegboard Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

2,74 € – 3,35 € netto (bez VAT)

Dla pliku: (right)ifixit_mako_pegboard_mount_0.4n_0.25mm_PLA_COREONE_1h57m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 3,05 € netto (środek widełek).

Masa podana przez autora
61 g
Czas druku podany przez autora
1,95 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Storage for the Mako iFixit Toolkit on a 1/4" Pegboard Mount

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I wanted a slightly more space efficient tool storage solution for the iFixit Mako toolkit which is why it is oriented sideways. I also included a more standard orientation. I use off the shelf expanding pegs for ¼" pegboard as I've found them to be more reliable and consistent compared to 3D printed pegs.

Required Hardware

QTY 2 expanding pegs are required for the current design but it can be remixed to add more mounting holes if required. The counter bores on the bottom side of the mount are intended to let the expanding pegs pull partially away from the pegboard forcing pegs to lock in place, leading to a snug fit.

Misc

I've included universal files and the base Solidworks file to enable easier remixing.

Tagi