Sagging Thetford fridge door fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Door not closing properly? May need to be lifted. Use this special washer that installs without removing the door.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thetford fridge door fix
A washer design that locks in place
Can be installed without removing the door or fridge (can be a bit difficult in some cases)
Lifts the door 2.5mm
Tested on the lower door of a Thetford N3170
Printing
PETG/PLA/ABS will probably all work fine.
Print it with the flat side down.
No supports necessary.
Set number of walls to the desired strength.
I used: 6 walls, 5 bottom/top layers to fill the whole washer.
Use
Lift the door and slip on the washer and let it drop down onto the lower part of the hinge.
Example print
Clas Ohlson black PETG