1 / 2
Siboor Trident Aux Fan Anti-Wobble Brace
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modification of aux fan duct to attach it to the Y gantry to dampen wobbling/vibration
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 32
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
The beefier legs remix didn't completely eliminate wobbling and knocking against the side panel, so I attached it to the Y gantry using a plate that goes through the very small clearance between the Y gantry and the side panel.
Print Settings
4 walls, infill doesn't matter since it's so thin. The brace plate is intended to be printed on its side with a brim (the STL should be oriented as such).
BOM
- 2x M3x6 BHCS (SHCS will not work for the upper screw due to a lack of clearance)
- 1x M3 roll-in nut
- 1x Voron-spec M3 heatset insert