1 / 2
Siboor Trident Aux Fan Anti-Wobble Brace — zdjęcie 1
1 / 2

Siboor Trident Aux Fan Anti-Wobble Brace

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modification of aux fan duct to attach it to the Y gantry to dampen wobbling/vibration

Ocena
0 / 5
Polubienia
13
Pobrania
32
Wydruki
0
Wyświetlenia
245
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

The beefier legs remix didn't completely eliminate wobbling and knocking against the side panel, so I attached it to the Y gantry using a plate that goes through the very small clearance between the Y gantry and the side panel.

Print Settings

4 walls, infill doesn't matter since it's so thin. The brace plate is intended to be printed on its side with a brim (the STL should be oriented as such).

BOM

  • 2x M3x6 BHCS (SHCS will not work for the upper screw due to a lack of clearance)
  • 1x M3 roll-in nut
  • 1x Voron-spec M3 heatset insert

Tagi