K1 Spring-loaded Door Latch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spring-loaded door latch for the K1 Series of printers (K1, K1 MAX, K1C, K1 SE)
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 199
- Makes
- 5
- Views
- 894
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Most of the K1 series use magnets to hold the door closed. However the K1 SE doesn't come with a door or cutouts for magnets in the frame so it needs a different solution. This mounts to the back of the handle and holds the door shut with positive spring pressure against the frame. It will fit on any K1 series printer with the stock door.
The stock M3 bolts should work but I used M3x10 to go with the hex handle. See photos for assembly order and build plate orientation. Loosen screws and move forward/backwards to adjust door hold tension.
Do not over tighten screws on a glass door there is risk of breakage!
This is the handle I am using: https://www.printables.com/model/867662-creality-k1-k1-max-k1c-handle-design-honeycomb
Printed on a K1C in ASA, .2 layer height