Führung Kettenblatt Bosch Gen5/Cube Stereo Hybrid 25
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Führungsring zur Führung der Kette auf dem vorderen Kettenblatt.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Führung für Kette auf dem Kettenblatt. Die Kette ist mehrmals nach innen abgesprungen und hat sich zwischen Rahmen und Ketteblatt verkeilt.
Der Ring lässt die Kette nicht nach innen abspringen.
Es gibt eine offene Version zur Montage, ohne das Kettenblatt zu demontieren und eine geschlossene Version, bei der das Kettenblatt demontiert werden muss.
Die offene Version ist seit längerem bei mir in Verwendung.
Zur Montage benötigt man noch fünf Ruthex M4short Schmelzbuchsen und fünf Schrauben M4x8
Auf dem angehängten Skizzenbild kann man die Maße mit dem eigenen Kettenblatt abgleichen um zu prüfen ob der Ring passend ist.
____________________________________________________________________
Guide ring for the chain on the chainring. The chain has jumped off to the inside several times and got jammed between the frame and the chainring.
The ring prevents the chain from dropping to the inside.
There is an open version for installation without removing the chainring, and a closed version that requires disassembly of the chainring.
I have been using the open version for quite some time.
For installation, you also need five Ruthex M4short heat-set inserts and five M4x8 screws.
On the attached sketch, you can compare the dimensions with your own chainring to check if the ring fits.
